FOAMGLAS Perinsul HL (High Load)
FOAMGLAS Perinsul HL has a very high density. It is used to eliminate thermal bridging. The upper surface is green and coated in Bitumen, the same as the lower surface.It is also laminated with a glass reinforced fleece which is compatible with Mortar.
All measurements in the table below are in mm.
Length 
Width 
Thickness
450
100
65
450
140
450
450
450
450
450
450
215
100
140
215
140
215
65
65
100
100
100
140
140
FOAMGLAS Floorboard T4+
FOAMGLAS Floorboard T4+ consists of FOAMGLAS slabs bonded together. The upper surface is green and coated with a composite of PE/Glass Fleece while the bottom surface is coated with Glass Fleece and is white.
The dimensions of FOAMGLAS Floorboard is (Length x Width)
1200mm x 600mm - in thicknesses of 40mm - 200mm.
FOAMGLAS Roofblock G1 T4+
FOAMGLAS Roofblock G1 T4+ is coated with a White Glass Fleece on the upper surface. This allows the adhering of a second FOAMGLAS layer or membrane, using a cold PU adhesive.
The dimensions of FOAMGLAS Roofblock G1 T4+ is: (Length x Width)
600mm x 450mm - in thicknesses of 40mm - 200mm.
FOAMGLAS Wallboard T4+
FOAMGLAS Wallboard T4+ consists of FOAMGLAS Slabs being bonded together. The upper surface is yellow, coated with a composite of PE/Glass Fleece and the bottom surface is white.
The dimensions od FOAMGLAS Wallboard T4+ is: (Length x Width
1200mm X 600mm - in thicknesses of 40mm x 200mm.

Timber Treatments

Route Militaire

Vale

Guernsey

GY3 5RP

E-mail: ttlg@hotmail.co.uk

 

Telephone: 01481248383

© 2017 by TIMBER TREATMENTS LTD.